01
Predictable Before Production
Review case records, tooth setup, occlusion and base design before manufacturing begins.
Digital Denture Solutions:Milled Full Dentures
Times Dental Lab provides CAD/CAM milling with clear, pink denture-base, dual-color and tooth-shade PMMA materials. The appropriate material and shade are confirmed according to the prescribed restoration and case requirements.
Printed Full DentureAcrylic Base and Transparent Base
Milled dentureDual-layer PMMA: Tooth Shade + V-Pink Base
Material-matchedRoute selected by case
Structured QCReview before shipment
Why digital dentures
Designed once. Preserved digitally.
Reproduced when needed.
A digital workflow does more than improve production. It creates a reusable case record that supports faster replacement, clearer communication and more consistent results.
Repeatable by design.
Scans, tooth setup and approved design files can be preserved as a connected digital record. If a denture is lost, damaged or needs to be reproduced, the existing design provides a reliable starting point—without rebuilding the entire case workflow from zero.
02
Design Approval
Confirm the digital setup and record requested changes before the case enters production.
03
Consistent Manufacturing
Use the approved digital design to support a controlled and repeatable CAD/CAM milling workflow.
04
Clear Traceability
Keep case inputs, approvals, production details and quality records connected.
Choose a manufacturing route
Printed and MilledDigital Denture Solutions
Production route
Printed Full Denture
Printed Full Dentures with Printed Acrylic Bases
FortiArch tooth resin and EZPRINT denture-base resin form the supplied material route for printed acrylic full dentures.
Tooth materialFortiArch Crown & Bridge 2.0
Base materialEZPRINT Denture Base
Shade optionsP1, P2, P3, P4
Production route
Milled Full Denture
Milled Dentures with Multiple PMMA Options
Times provides CAD/CAM milling with clear, pink denture-base, dual-color and tooth-shade PMMA materials. The appropriate material, shade and milling route are confirmed according to the prescribed restoration and case requirements.
Milling MaterialsClear, Pink, Dual-color & Tooth-shade PMMA
Featured MaterialYamahachi DUAL COLOR TYPE
Dual-color ShadesV-Pink + A1, A2, A3, A3.5, B2, C2
Decision support
Which Production Route Fits Your Case?
Compare the confirmed manufacturing methods, base options and materials available for Times digital complete dentures. The final production route is selected after reviewing the case records and technical requirements.
Comparison
Printed DenturesMilled Dentures
Manufacturing
Printed DenturesAdditive printing
Milled DenturesSubtractive CAD/CAM Milling
Material System
Printed DenturesFortiArch Teeth + EZPRINT Denture Base
Milled DenturesClear, pink, tooth-shade or dual-color PMMA
Material Structure
Printed DenturesTeeth and base printed separately
Milled DenturesSingle-color or dual-layer PMMA, depending on the selected route
Case Applications
Printed DenturesComplete dentures and case-dependent try-ins
Milled DenturesFull, duplicate and temporary dentures
Final Selection
Printed DenturesConfirmed after case review
Milled DenturesConfirmed after case review
Not sure which route to choose? Send us the case records and let the Times team recommend the appropriate production method.
Milled denture material
Multiple PMMA Options.One Controlled Workflow.
Times Dental Lab provides CAD/CAM milling with clear, pink denture-base, tooth-shade and dual-color PMMA materials, giving laboratories and clinics flexible options for different restorations and case requirements.
Dual-color Denture PMMA
Clear PMMA
Pink Denture-base PMMA
Tooth-shade PMMA
The final material, shade and disc specification are confirmed after case review and according to current availability.
FEATURED MATERIAL
YamahachiDUAL COLOR TYPE
Yamahachi DUAL COLOR TYPE is a dual-layer PMMA disc that combines a tooth-shade layer with a V-Pink denture-base layer. It supports CAD/CAM milling of full dentures, duplicate dentures and temporary dentures.
Tooth-shade and V-Pink denture-base layers in one disc.
98.5 mm disc diameter.
35 mm total thickness, with each layer approximately 17.5 mm.
Suitable for full dentures, duplicate dentures and temporary dentures.
Standard combinations: V-Pink + A1, A2, A3, A3.5, B2 or C2.
Case journey
From approved setupto finished denture.
Case review and design approval happen before route-specific manufacturing begins.
01
Case Review
Check records, scans, bite and prescription.
02
Design Approval
Confirm setup, midline, occlusion and shade.
03
Disc Positioning
Position the design within the dual-color disc.
04
Mill & Finish
CAD/CAM mill, finish and polish.
05
Final QC
Verify against the approved design.
Case requirements
Prepare the casefor review.
Complete records help reduce clarification rounds before design begins.
Digital Files and Physical Records
- Upper and lower scans
- Bite scan or jaw-relation record
- STL files
- Physical impressions or models
- Wax rim, where required
- Existing denture reference
Bite, Jaw Relationship and Tooth Setup
- Vertical dimension and centric relation
- Midline, smile line and occlusal plane
- Tooth mould and tooth shade
- Base shade
- Patient photographs
- Special setup instructions
Looking for a printed solution?
Explore Printed Full Dentures →FAQ
1.WHICH PMMA MATERIALS CAN TIMES MILL?
Times supports clear PMMA, pink denture-base PMMA, dual-color denture PMMA and tooth-shade PMMA. The appropriate material, shade and milling route will be confirmed according to the prescribed restoration, case requirements and current availability.
2.WHAT FILES DO I NEED TO SEND FOR A PRINTED FULL DENTURE CASE?
Please provide the prescription, upper and lower scans or models, bite records, available clinical photographs, tooth shade, base shade and any relevant existing-denture records. Our team will review the submission and identify any missing information.
3.CAN I APPROVE THE DIGITAL SETUP BEFORE MILLING BEGINS?
Yes. The digital setup can be sent for review before production. You can check the tooth arrangement, midline, smile line, occlusion and other requested details. Milling begins after the required approval is recorded.
4.WHAT CASES IS THE DUAL-COLOR PMMA DISC SUITABLE FOR?
Yamahachi DUAL COLOR TYPE is intended for CAD/CAM production of full dentures, duplicate dentures and temporary dentures. Final suitability is confirmed after reviewing the clinical records and prescription.
5.CAN A MILLED DENTURE BE REPRODUCED IF IT IS LOST OR DAMAGED?
The approved digital setup and relevant case files can be preserved to support future reproduction. Before remanufacturing, Times will review the original records, current clinical conditions and material availability. Updated records may be required if the patient's oral condition has changed.
6.WHAT SHOULD I DO IF THE MILLED DENTURE REQUIRES AN ADJUSTMENT OR REMAKE?
Please send clear photographs, updated scans where available, and a description of the issue. Times will review the feedback against the prescription, approved design and production records before recommending an adjustment, remake or updated case submission.
Send Your Dental Lab Case to Times Dental Lab
Times Dental Lab can support both digital and physical case submissions. You can send intraoral scans, STL files, impressions, models, bite records, shade photos, implant components, and case instructions based on the product type.
If you are not sure which material or workflow is suitable, our team can review your case information and provide practical suggestions.